-COMPLETED MY WING STORAGE STAND AND MOVED THE LEFT WING INTO THAT -MOVED MY RIGHT WING INTO THE CONSTRUCTION STAND -RIVETED FLAP BRACE TO SPAR -DRILLED, DEBURRED & DIMPLED THEN RIVETED AILERON GAP FAIRING TO SPAR AND TOP SKIN***COULDN’T RIVET…
Author: Taran
-DRILLED OUTBOARD AILERON BRACKET TO SPAR/OB RIB-TOUCHED UP TRIMMED INBOARD AILERON BRACKET WITH PRIMER-I HAVE NOTICED THAT THE LWR RIVET ON BOTH THE BRACKETS IS A 426 (COUNTERSUNK) TYPE AND THE PLANS DON’T SEEM TO SHOW WHAT SIDE THE COUNTERSINK…
-FINISHED RIVETING LEFT WING TOP SKINS -FITTED AILERON HINGES INTO POSITION, HAD TO SAND A BIT OF THE UPPER EDGE OF THE INBOARD HINGE BRACKET TO STOP IT FOWLING ON THE SKIN-SPAR RIVETS-DRILLED INBOARD BRACKET TO SPAR AND ALODINED GROUND…
-FINISHED DRILLING RIGHT WING TOP SKINS Manual Reference: 7-4 Installed Removed Rivets Today 0 0 Wing Rivets 2507 50 Total Project Rivets 4728 102 Hours 1 Total Hours 443 Statistics
-CLECOED TOP SKINS IN PLACE, FOUND THAT I HADN’T DRILLED SPAR CHANNEL TO SPAR REINFORCEMENT PLATES SO REMOVED THE OUTER SKIN DRILLED THOSE AND REATTACHED OUTER SKIN. -DUE TO THE OTHER WING STILL BEING IN THE STAND THIS WING HAS…
-TEMP CLECOED UPPER SKINS IN PLACE AND MARKED SO AS TO AVOID MISTAKES & CONFUSION LATER -DRILLED WINGWALK DOUBLER TO 702 UPPER IB SKIN -CUT RIVET LINES OUT OF PROTECTIVE VINYL ON UPPER SKINS Manual Reference: 7-4 Installed Removed…
-RIVETED REMAINING REAR SPAR-RIB RIVETS-RIVETED ALL MAIN SPAR-RIB RIVETS Manual Reference: 7-3 Installed Removed Rivets Today 58 3 Wing Rivets 2507 50 Total Project Rivets 4728 102 Hours 2.5 Total Hours 437.5 Statistics
-STARTED RIVETING RIGHT WING SKELETON TOGETHER Manual Reference: 7-3 Installed Removed Rivets Today 47 0 Wing Rivets 2449 47 Total Project Rivets 4670 99 Hours 1 Total Hours 435 Statistics
-ALODINED MAIN RIBS-PRIMED RIGHT WING MAIN RIBS Manual Reference: 7-2 Installed Removed Rivets Today 0 0 Wing Rivets 2402 47 Total Project Rivets 4623 99 Hours 2.5 Total Hours 434 Statistics
-DISSASSEMBLED RH WING SKELETON-DEBURRED BOTH SPARS-DRILLED WIRING HOLE PILOTS IN RIBS USING TEMPLATE FROM LEFT WING-DEBURRED BOTH RIBS-OPENED UP WIRING HOLES TO 3/8 Manual Reference: 7-3 Installed Removed Rivets Today 0 0 Wing Rivets 2402 47 Total Project Rivets 4623…