Riveted Reinforcement plates & platenuts to spar Riveted 904 & associated parts – installed alternate LP4-3 in R405PD – R710 IAW Drwg6 R1 Manual Reference: Hours: 2 Total Hours: 127.95
Month: April 2013
Drilled, Countersunk & Deburred Rudder Counterbalance Primed All Parts Manual Reference: Hours: 2.5 Total Hours: 125.95
Dimpled all parts & countersunk AEX Wedge Drilled, Deburred & Dimpled to 1/8” upper aft 3 holes on skins Manual Reference: Hours: 3 Total Hours: 123.45
Fabricated R918 Bottom Strips Drilled R918 to rudder assy Disassembled Rudder & hole deburred all components Edge deburred complete assembly Manual Reference: Hours: 3.5 Total Hours: 120.45
-Final Drilled all of rudder -Trimmed R-710 Horn Brace as per drawing, clecoed to rudder assy and match drilled. Manual Reference: Hours: 1.3 Total Hours: 116.95
-Fabricated R-917 Shim -Bolted R-405PD horn to spar & final drilled top holes -Clecoed horn to lwr rib & radiussed horn to fit -Clecoed horn and rib to spar then slipped shim in and drilled to #30 -Clecoed reinforcement plates…
Clecoed bottom rib to spar & enlarged .125″ hole to 3/8″ Manual Reference: Hours: 0.1 Total Hours: 113.65