-Edge deburred tank skin & baffle -Dimpled tank skin rivet holes -Again struggling to find bits, this time the aluminium tube for the tank vent line, borrowed from the fuse kit however i’ll have to have a good look for…
Month: September 2023
-Made T-714 clip -Removed cap assy and countersunk flange – -Hole deburred tank skin, cleaned adhesive residue off skin, turned out to be much more effort than expected, i’m gonna have to get some MEK to make this easier in…
-Deburred & dimpled/countersunk IB rib & access panel ring -Cleaned up IB rib & access panel ring & riveted together with nutplates -Used rod end screwed into drain flange to center on hole and drilled to skin -Drilled Fuel cap…
-Disassembled tank, and removed vinyl -Photocopied my plan sheet detail for the 405/410 drilling, scaled it to the correct size and used it to drill the T-410 reinforce plate, turns out I used the angle i was gonna borrow from…