Riveted Skins to Counterbalance Skin Riveted on Tip Rib R903 Riveted Skin on Manual Reference: Hours: 2.5 Total Hours: 133.25

Installed Counterbalance Clecoed Skins to Spar Drove 8 Rivets from Skin to Counterbalance Skin Manual Reference: Hours: 1 Total Hours: 130.75

Riveted Counterbalance skin to rib Had issued see DfD12 Manual Reference: Hours: 1.8 Total Hours: 129.75

Riveted Reinforcement plates & platenuts to spar Riveted 904 & associated parts – installed alternate LP4-3 in R405PD – R710 IAW Drwg6 R1 Manual Reference: Hours: 2 Total Hours: 127.95

Drilled, Countersunk & Deburred Rudder Counterbalance Primed All Parts Manual Reference: Hours: 2.5 Total Hours: 125.95

Dimpled all parts & countersunk AEX Wedge Drilled, Deburred & Dimpled to 1/8” upper aft 3 holes on skins Manual Reference: Hours: 3 Total Hours: 123.45

Fabricated R918 Bottom Strips Drilled R918 to rudder assy Disassembled Rudder & hole deburred all components Edge deburred complete assembly Manual Reference: Hours: 3.5 Total Hours: 120.45

-Final Drilled all of rudder -Trimmed R-710 Horn Brace as per drawing, clecoed to rudder assy and match drilled. Manual Reference: Hours: 1.3 Total Hours: 116.95

-Fabricated R-917 Shim -Bolted R-405PD horn to spar & final drilled top holes -Clecoed horn to lwr rib & radiussed horn to fit -Clecoed horn and rib to spar then slipped shim in and drilled to #30 -Clecoed reinforcement plates…

Clecoed bottom rib to spar & enlarged .125″ hole to 3/8″ Manual Reference: Hours: 0.1 Total Hours: 113.65