-CLEANED UP ALL PARTS WITH MEK-CARRIED OUT CONTINUITY CHECK OF CAPACITIVE SENDER PLATES/PLUG-CARRIED OUT FINAL CLEARANCE CHECK ON FUEL TANK BAYS-TOOK VIDEO OF CLEARANCE CHECK – SEE VIDEO 20150420_154440_ -SEALED TERMINALS ON IB SENDER PLATE-RUN SEALANT ALONG BAFFLE RIVET LINES…
-TIDIED UP SURFACES TO BE SEALED WITH REAR BAFFLE-CLEANED ALL LOOSE ITEMS OUT OF TANK-GOT ALL PARTS READY TO CLOSE TANK Installed Removed Rivets Today 0 0 Wing Rivets 716 26 Total Project Rivets 2937 78 Hours 1.5 Total Hours…
-SEALED & RIVETED IB END RIB INTO PLACE-SEALED AND RIVETED T-405 & T-410 INTO PLACE -RUN SEALANT AROUND T-407 RING Manual Reference: 7-7 Installed Removed Rivets Today 48 0 Wing Rivets 716 26 Total Project Rivets 2937 78 Hours…
-INSTALLED IB CAPACITIVE FUEL PLATE -TRIAL FITTED VENT LINE, BENT IB END AS REQUIRED & CHOPPED OB END TO FIT CORRECTLY -FABRICATED PLATE TO COVER TOOLING HOLE ON END OF OB RIB-SEALED & RIVETED TOOLING HOLE COVER ONTO RIB &…
-CLEANED UP ALL HOLES/COUNTERSINKS-USED TOOTHPICK WITH SEALANT UNDER THE RIVET HEADS TO INSTALL RIVETS WET-RIVETED RIB #6 INTO PLACE-MID WAY THROUGH COMPRESSOR STOPPED WORKING, SO BORROWED ANOTHER COMPRESSOR BUT DIDNT GET A CHANCE TO GET PICS-SEALED SHOP HEADS Manual Reference:…
SEALED RIB # 6 INTO POSTION READY TO BE RIVETED Manual Reference: 7-6, 7-7 Installed Removed Rivets Today 0 0 Wing Rivets 581 25 Total Project Rivets 2802 78 Hours 0.5 Total Hours 313.25 Statistics
-FLARED LH FUEL TANK VENT LINE-CRIMPED ALL REMAINING CAP FUEL SENSOR FITTINGS Manual Reference: 7-6, 7-7, 7-8 OP-7 Installed Removed Rivets Today 0 0 Wing Rivets 581 25 Total Project Rivets 2802 78 Hours 1 Total Hours 312.75 Statistics
-CLEANED UP ALL HOLES/COUNTERSINKS-USED TOOTHPICK WITH SEALANT UNDER THE RIVET HEADS TO INSTALL RIVETS WET-RIVETED RIBS 3, 4 & 5 INTO PLACE-SEALED SHOP HEADS-DONE FOR TODAY Manual Reference: 7-6, 7-7 Installed Removed Rivets Today 100…
-DECIDED TO TRY A LESS MEESY WAY TO SEAL RIBS IN, WHERE THEY ARE SEALED IN PLACE WITH ALL CLECOES THEN RIVETED THE NEXT DAY.-SEALED RIBS 3, 4 & 5 INTO PLACE WITH ALL CLECOES Manual Reference: 7-6, 7-7…
-SCREWED OB CAPACITIVE PLATE TO RIB #6 & BOLTED WIRE TO IT -CLEANED UP SKIN WHERE RIBS WILL BE SEALED-SEALED & RIVETED 1ST RIB INTO SKIN, COULDN’T DO ANYMORE AS THE SEALANT WAS GOING OFF Manual Reference: 7-6, 7-7,…