FINALLY BACK IN THE SHED AFTER A FEW MONTHS OFF
-STARTED BY MAKING UP A LONG DRILL TO DRILL PITOT/AOA HOLES THROUGH THE WING WALK RIBS, AFTER A LOT OF THINKING I ENDED UP JUST WELDING A PIECE OF STEEL BAR ONTO THE 3/8 DRILL BIT, AND THIS WORKED WELL
-DRILLED AOA HOLES IN WINGWALK RIBS READY FOR BUSHINGS TO BE FITTED
-ORDERED REQUIRED HARDWARE FROM VANS
Manual Reference:
| Installed | Removed | |
| Rivets Today | 0 | 0 |
| Wing Rivets | 899 | 26 |
| Total Project Rivets | 3120 | 78 |
| Hours | 1.5 | |
| Total Hours | 326.75 |
