-Final Drilled all of rudder -Trimmed R-710 Horn Brace as per drawing, clecoed to rudder assy and match drilled. Manual Reference: Hours: 1.3 Total Hours: 116.95
Category: Rudder
-Fabricated R-917 Shim -Bolted R-405PD horn to spar & final drilled top holes -Clecoed horn to lwr rib & radiussed horn to fit -Clecoed horn and rib to spar then slipped shim in and drilled to #30 -Clecoed reinforcement plates…
Clecoed bottom rib to spar & enlarged .125″ hole to 3/8″ Manual Reference: Hours: 0.1 Total Hours: 113.65
Back Riveted rudder stiffeners to skins Today [234 Driven – 2 Removed] Total [703 Driven – 13 Removed] Manual Reference: Hours: 2 Total Hours: 113.55
Prepped, Alumiprepped, Alodined & Primed Rudder stiffeners Manual Reference: Hours: 2.5 Total Hours: 111.55
Flattened Dimple Removed damaged material Cleaned & Deburred Applied JB Weld Wasnt happy with the results so added a new hole between damaged and next hole. Filled Damaged hole with jb weld and primed skin Manual Reference: DfD-11 Hours: 2.5…
-Finished edge deburring stiffeners -Dimpled stiffeners -Dimpled LH skin – Misdimpled one hole (refer DfD-11) -Dimpled RH Skin Manual Reference: Hours: 1.5 Total Hours: 106.05
Finished hole deburring skin @ stiffener locations Manual Reference: Hours: 0.5 Total Hours: 104.55
-Match drilled stiffeners to rudder -hole deburred stiffeners Manual Reference: Hours: 1.5 Total Hours: 104.05
Finished trimming stiffeners Manual Reference: Hours: 0.5 Total Hours: 102.55