SUNK BAR INTO BENCH TO MAKE BACK RIVETING EASIER RIVETED STIFFENERS TO RHS SKIN Manual Reference: Hours: 2 Total Hours: 152.45
Category: Empennage
PREPPED AND PRIMED STIFFENERS AND SKIN Manual Reference: Hours: 2 Total Hours: 150.45
DEBURRED HOLES ON SKIN & STIFFENER DIMPLED HOLES ON SKIN AND STIFFENERS DRILLED 610 & 611 REINFORCEMENT PLATED TO SPAR EDGE DEBURRED 702 SPAR, 703/4 RIBS, 610/611 REINFORCEMENT PLATES & 713 SKIN FLUTED 703/4 RIBS CLECOED/DRILLED 703-704 RIBS, DRILLED TO…
DRILLED STIFFENERS TO RH SKIN REMOVED VINYL AROUND HOLES Manual Reference: Hours: 1.5 Total Hours: 146.45
FINISHED DEBURRING STIFFENERS Manual Reference: Hours: 1.5 Total Hours: 144.95
CUT/TRIMMED STIFFENERS MADE 3 JKL STIFFENERS BUT UNDERTRIMMED THE OTHER 3 STARTED DEBURRING STIFFENERS Manual Reference: Hours: 1.5 Total Hours: 143.45
CLECOED & RIVETED NEW TIP RIB IN CLECOED & RIVETED REAR SPAR ON HORIZONTAL STAB NOW COMPLETE Manual Reference: Hours: 1.5 Total Hours: 141.95
DRILLED, DEBURRED, DIMPLED & PRIMED NEW HS706 Manual Reference: Hours: 0.5 Total Hours: 140.45
Riveted HS707 to top side of the skin then bottom side Clecoed Spar assy on then blind riveted 404-702-405 Installed spar to tip rib rivets Riveted Assy together Repeated for RHS While Riveteing RH HS706 to spar, rib became damaged,…
Removed Angle & Cleaned Sealant off edges & out of dimples Taped Rivets in Flipped rudder and weighted down half set 4 rivets, didn’t sit flush because of bowed back rivet plate Manual Reference: Hours: 0.7 Total Hours: 134.95