Today I -Riveted HS609PP Spar Reinforcing Bars to the HS603PP spar channels. -Riveted HS412PP & HS413PP Hinge brackets to Spar -Installed Hinge Assy. on Spar with AN3-5A Bolts, AN960-10 Washers & AN365-1032 Nuts to a torque of 20-25in/lb Manual Reference:…
Category: Horizontal Stabiliser
Today I Finished Deburring the RH Horizontal Stabiliser (All the hole deburring is now complete) Dimpled RH Horizontal Stabiliser skin (All Dimpling now complete) Finished edge deburring Skins & Skeleton (All edge Deburring now complete) Manual Reference: HS/Deburr/S2-4 Hours: 2.9…
Today I: -Finished Dimpling LH Skin -Started Hole deburring RH Skin -Prepped & Primed HS603PP Rear Spars Manual Reference: HS/DEBURR/S2,3 Hours: 2.3 Total Hours: 54.65
Today I: -Continued Deburring of Skeleton -Finished Hole Deburring Spars -Started Hole Deburring Ribs -Finished Hole Deburring Ribs -Finished Hole Deburring of LH Skin -Dimpled Skeleton -Started Dimpling LH Skin Manual Reference: HS/DEBURR/S2 Hours: 3.3 Total Hours: 52.35
Today I: -Deburred & Primed the HS710 & HS714 Angles. -Removed vinyl around holes on LH Skin & Deburred all external holes. Manual Reference: HS/DEBURR/S4 Hours: 2.8 Total Hours: 49.05
Today I continued hole deburring spars, although as I am making no progress I decided to enquire about the EZ-Burr tool to see if that will be quicker than what i’m currently doing which is running the deburring tip through…
-Started deburring & realised I had missed final drilling a row of holes, so I had to completely assemble the LH Horizontal Stabiliser & final drill the row of holes I missed. -Dissassembled the Horizontal Stabiliser & continued to deburr…
Finished edge deburring of the horizontal stab skeleton Manual Reference: HS/DEBURR/S1 Hours: 1 Total Hours: 42.35
Continued deburring of horizontal stab skeleton Manual Reference: HS/PREP/S2 Hours: 0.5 Total Hours: 41.35
Touched up Missed bits on HS609PP Stiffeners Deburred Edges and 90% of holes on RH 609PP Rear Spar Manual Reference: HS/PREP/S2&4 Hours: 2.4 Total Hours: 40.85