-Clecoed RH wing upper skins in place
-Made paper gauge for marking aileron pushrod ends for drilling & marked drill holes
-Fitted VA-111 rod ends and drilled pipe to rod ends #40
-Opened up rod-rod end holes to #30 & blind riveted
-Screwed in MD3614M rod end bearings/jam nuts, final length still to be set
-Cut tube for W-818 to length & tidied up
-Trial fitted rod end fittings
Manual Reference: 7-9, 7-11, DWG-15A
| Installed | Removed | |
| Rivets Today | 24 | 0 |
| Wing Rivets | 4459 | 78 |
| Fuse Rivets | 165 | 2 |
| Empennage Rivets | 2215 | 49 |
| Total Project Rivets | 6845 | 128 |
| Hours | 7 | |
| Total Hours | 607 |
