-Performed the planned fix on my misdrilled LE rib-spar holes – Fitted 2x MS27839 screws & AN365 Nuts
-In preparation of prepping & priming wing skins made a few simple skin drain/paint stands from scrap timber
-Lightly filed, sanded & scotchbrited skin overlaps to make a scarf joint, only did the top as I couldn’t get a great finish with the dimpling already being done, will just wear any raised edges
-As i’m gonna be priming I decided to roughly cut my aluminium aileron pushrods, wanted to get them completely done but run out of time, will finish later
Manual Reference: 7-9, DfD-31
| Installed | Removed | |
| Rivets Today | 0 | 0 |
| Wing Rivets | 4435 | 78 |
| Fuse Rivets | 165 | 2 |
| Empennage Rivets | 2215 | 49 |
| Total Project Rivets | 6821 | 128 |
| Hours | 3 | |
| Total Hours | 598 |
