-Removed vinyl and hole deburred right flap
-Edge deburred right flap
-Removed small amounts off edge/around hole corrosion
-Dimpled
-Primed all remaining bits, came up much better than last time, must not have been thouroughly mixed last time.
-Clecoed 706a/b to spar and riveted to spar
-Drilled & riveted rod end nutplateds to both side inboard ribs
-Started riveting ribs to skin
Manual Reference: 7-11
| Installed | Removed | |
| Rivets Today | 13 | 0 |
| Wing Rivets | 2875 | 60 |
| Fuse Rivets | 24 | 0 |
| Empennage Rivets | 2215 | 49 |
| Total Project Rivets | 5120 | 109 |
| Hours | 5 | |
| Total Hours | 506.5 |
