-CUT TIEDOWN SPACERS OUT OF SUPPLIED BAR-DRILLED LIGHTNING HOLE OUT OF SPACERS
-MEASURED AND DRILLED REFERENCE POINT ON 731 TIEDOWN BAR
-CLAMPED SPACERS AND TIEDOWN BAR TO SPAR AND DRILLED ATTACH HOLES
-DRILLED COUNTERSUNK ASSY FOR PLATENUTS
-PREPPED SPACERS & TIEDOWN BAR FOR PRIMING
REAR SPAR
-FOUND SOME LIGHT CORROSION ON THE REAR SPAR CHANNEL WHEN I REMOVED THE VINYL.
-CORROSION REMOVED REFER DFD23
-MARKED & TRIMMED 707D & G AS PER DWG 38
-EDGE DEBURRED SPAR, REINFORCEMENT FORK & REINFORCEMENT PLATES
-MATCH DRILLED DOUBLER PLATES TO SPAR
-CUT OUT AILERON PUSHROD HOLE IN DOUBLER
-INSTALLED AND MATCH DRILLED REINFORCEMENT FORK AND PLATE
Manual Reference: 7-2
| Installed | Removed | |
| Rivets Today | 0 | 0 |
| Wing Rivets | 1288 | 34 |
| Total Project Rivets | 3509 | 86 |
| Hours | 4 | |
| Total Hours | 377 |
