TODAY I
-TRIMMED THE IB ENDS OF 2ND HS702 AS PER “FRONT SPAR TAB DETAIL” DRAWING 3
-MARKED BEND LINE AND CUT RELIEF NOTCH ON HS702 #2
-I FOUND SOME DEEP SCRATCHING AT THE RELIEF NOTCH ON HS702 #1 SO I HAVE BLENDED THEM OUT AND EMAILED VANS WITH MEASUREMENTS AND PHOTOS
-WHILE I WAIT FOR THE RESULTS FROM VANS I’LL BUILD ON AND REDO HS702 #1 IF NEED BE.
-BENT TABS ON HS 702 #1&2 AS PER VIEW B-B DRAWING 3
-COUNTERSUNK CENTER FOUR HOLES ON HS710 & 714 & DIMPLED CENTER FOUR HOLES ON HS702.
STEPS 5, 6, 7, 8, 9 COMPLETE
Manual Reference: HS/F.S ASSY/S5-9
Hours: 2.17
Total Hours: 12.4
